How To Reset Wireless Network Adapter Windows 7

Download Article

Download Commodity

This wikiHow teaches you dissimilar ways to reset the Wi-Fi adapter and connections on a Windows PC. Wireless issues tin often be fixed by disabling and re-enabling the adapter, only sometimes you'll need to accept things a bit farther by reinstalling the commuter or resetting all network adapters and settings on the PC.

1. one

   Right-click the Commencement button. This brings up a menu if you lot're using Windows 10.

   • If you're using Windows 8, 7, or Vista, follow these steps instead:
     • Click the Start carte du jour and select Command panel.
     • Click Network and Sharing Heart. If you don't see it, click Network and Internet. You lot should find the Network and Sharing Center there.
     • Click Change adapter settings in the left panel.
     • Skip to Stride four.

2. 2

   Click Network Connections . It's almost the middle of the bill of fare.

   Ad

3. iii

   Click Modify adapter options . Information technology'due south under the "Change your network settings" header in the right panel. A list of your connections volition appear.

4. 4

   Right-click the Wi-Fi connection and select Disable . This turns off the wireless adapter.

5. five

   Right-click the Wi-Fi connection and select Enable . The adapter volition restart and attempt to connect to your default Wi-Fi network.

   • If you're still having problem with your connection, try connecting to a different wireless access bespeak. If that works, the consequence may be with your net provider.
   • If you're still having trouble, yous tin can attempt resetting all network adapters from the control prompt.

Advertising

1. 1

   Right-click the Kickoff push button. A menu will announced. This method will delete all of your computer'due south network connections and settings, including the wireless adapter. If you've already tried disabling and re-enabling the wireless adapter and information technology didn't solve your problem, use this method.

   • This method describes the easiest way to reset your network adapters using Windows 10. If you're using an earlier version of Windows or prefer working from the command prompt, you might need to reset all network adapters from the command prompt.
   • Since this method will restart your PC, save any work you have open.

2. 2

   Click Network Connections . It's near the middle of the card.

3. 3

   Scroll down and click Network reset . It's 1 of the links above the "Have a question?" section. You'll run across a message telling you that your network adapters will all exist removed and reinstalled and that you'll take to reconnect to the internet afterward.

   • Yous may have to reinstall any VPN software you're currently running after the reset is complete.

4. four

   Click Reset at present . This begins the full network adapter reset procedure. When the network adapters are uninstalled, your computer will restart then re-install the adapters on its own.

Advertisement

1. 1

   Open the control prompt as an administrator. This method will delete all of your estimator'south network connections and settings, including the wireless adapter, and so reinstall them. If you've already tried disabling and re-enabling the wireless adapter and it didn't solve your problem, use this method on whatever version of Windows. Here's how to get to the admin-level command prompt:^[1]

   • Press ⊞ Win+S to open the search bar.
   • Type cmd into the search bar.
   • Right-click Command prompt in the results to bring up the bill of fare.
   • Click Run as administrator.
   • Enter your password if prompted.

2. 2

   Blazon netsh winsock reset and press ↵ Enter . Subsequently you run the command, you'll return to the command prompt. You'll demand to run some additional commands in a specific club.

3. 3

   Type netsh int ip reset and press ↵ Enter .

4. 4

   Blazon ipconfig /release and press ↵ Enter .

5. 5

   Blazon ipconfig /renew and press ↵ Enter .

6. half dozen

   Type ipconfig /flushdns and printing ↵ Enter .

7. 7

   Restart your PC. In one case your PC comes back upwards, you'll demand to reconnect to your Wi-Fi network, which includes re-entering the password (if applicative).

   • If you're still having trouble with your connection, attempt connecting to a unlike wireless access point. If that works, the effect may be with your internet provider.
   • Continue with the "Uninstalling and Re-installing the Wireless Driver" method if y'all're still having trouble.

Advertising

1. 1

   Open the Device Managing director. If yous were unable to fix your wireless issue past disabling and re-enabling the adapter, at that place could be an upshot with the driver. Follow the steps for your version of Windows to admission the Device Manager:^[2]

   • Windows 10 and 8: Type device into the Windows search bar and click Device Manager when it appears.
   • Windows 7 and Vista: Open the Start card and select Control Console. Click Device Manager, which should appear under "System."

2. 2

   Click the pointer adjacent to "Network adapters." This expands a list of your network hardware.

3. iii

   Double-click your wireless adapter. It'll be the choice that contains either "wireless" or "Wi-Fi."

4. 4

   Click the Driver tab. It's at the top of the window.

5. 5

   Click Uninstall Device . Information technology's about the lesser of the window. A confirmation message will appear.

6. 6

   Click Uninstall to ostend. This deletes the Wi-Fi driver from your estimator.

7. vii

   Reboot your computer. When the reckoner comes back upward, Windows will automatically reinstall your Wi-Fi adapter and its default driver.

   • If reinstalling the driver doesn't solve your network effect, cheque your computer manufacturer's website for updated network drivers.

Ad

Add New Question

• Question

  How do I fix my wireless adapter permanently if I need to use the troubleshooter all the fourth dimension?

  

  From Device Managing director click on your adapter and go to the Advanced tab. Nether the WiFi setting change 802.11b/yard/n to 802.11b/g (Then there is no "northward" at the end). As well go to the Power Direction tab and uncheck ability saving.

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

About This Article

Article Summary X

1. Right-click the Start menu.
2. Click Network Connections.
3. Click Alter adapter options.
4. Right-click the Wi-Fi connexion and select Disable.
5. Right-click the Wi-Fi connection and click Enable.

Did this summary help y'all?

Thank you to all authors for creating a page that has been read 288,821 times.

Is this article up to date?

Source: https://www.wikihow.com/Manually-Reset-Your-Wireless-Adapter-in-Windows

Posted by: herreramodyette60.blogspot.com

Share this post